Skim coat, also known as a level-five drywall finish, is a texturing technique that’s used to make a wall smooth or to repair damaged drywall. It’s a quick, long-term solution for repairing minor cracks, filling a joint, or leveling an existing flat surface, to give the wall a plaster-like appearance and in situations when only the smoothest surface will do.
|Chemical Name:||Hydroxypropyl Methyl Cellulose/Methyl Hydroxypropyl Cellulose|
|Appearance:||White or off-white powder|
|Moisture content:||≤6 ％|
|Ash content:||≤5 ％|
|Methoxy content:||19-24 ％|
|Hydroxypropyl content:||4-12 ％|
|Particle size:||99% pass 80 mesh|
|Viscosity:||85,000-110,000 mPa.s (NDJ-1, 2% solution, 20℃) |
45,000-60,000 mPa.s (Brookfield-RV, 2% solution, 20℃)
● Good water retention will make sure all the additives reach the best performance in the product formulation.
● Good workability to increase the efficiency.
● Good say-resistance property by providing a good viscosity of the wet mortar.
Weight/20′ container: approx. 12 metric tons with pallets, approx. 14 metric tons without pallets
Weight/40′ container: approx. 24 metric tons with pallets, approx. 28 metric tons without pallets
Stored in its original packaging in a dry and place with temperature below 30℃.
It is recommended to use Cellulose Ether HPMC/MHPC within 2 years.